Neper

This is a curve with a very slow decay at Start and a very fast decay at the End. The area of the curve is 60.53 % of the full surrounding square area (-4.36 dB FSA).

If based on area ratio to Linear area, it’s RT60 time should be 1.21 of Linear RT60.

This curve was calculated inserting the Euler number 2.718282 into a base 10 logarithmic equation.

Logarithm – Wikipedia

WPN

This collection was made by direct Fall from a mix of White and Pink Noise of default style Octave Curves.

Basically, used on percussive material as extra slow decay impulse (gate reverb style), or in any electronic musical source.

The collection is divided into  44.1 kHz 24 bit, 48 kHz 24 bit and 96 kHz 24 bit folders.

Inside each folder 12 tone folders (A to Bb).

Inside each tone folder we have 8 impulse files, in a total of 288 Impulse files, with the following folder structure:

Wave Naming

WPN N_Nep A 3 Means 3 White and Pink Noise as generator, Neper as fall curve, A Minor as Tone and 3 seconds of Impulse length.

WPN N_Nep A MS 3 The same as previous but with M/S building processing.

WPN N_Nep A 6 Means White and Pink Noise as generator, Neper  as fall curve, A Minor as Tone and 6 seconds of Impulse length.

WPN N_Nep Oct A 6 Oct means one octave up.

The files on the other folders follow the same syntax meaning

The post 60.53 % LOG Neper WPN appeared first on Tuned Pulses.

Neper

This is a curve with a very slow decay at Start and a very fast decay at the End. The area of the curve is 60.53 % of the full surrounding square area (-4.36 dB FSA).

If based on area ratio to Linear area, it’s RT60 time should be 1.21 of Linear RT60.

This curve was calculated inserting the Euler number 2.718282 into a base 10 logarithmic equation.

Logarithm – Wikipedia

WN

This collection was made by direct Fall from White Noise of default style Octave Curves.

Basically, used on percussive material as extra slow decay impulse (gate reverb style), or in any electronic musical source.

The collection is divided into  44.1 kHz 24 bit, 48 kHz 24 bit and 96 kHz 24 bit folders.

Inside each folder 12 tone folders (A to Bb).

Inside each Tone folder has 8 clean impulse files and another folder with 8 phase processed impulse files, in a total of 576 Impulse files, with the following folder structure:

Wave Naming

WN N_Nep A 3 Means 3 White Noise as generator, Neper as fall curve, A Minor as Tone and 3 seconds of Impulse length.

WN N_Nep A MS 3 The same as previous but with M/S building processing.

WN N_Nep A 6 Means 3 White Noise as generator, Neper as fall curve, A Minor as Tone and 6 seconds of Impulse length.

WN N_Nep Oct A 6 Oct means one octave up.

WN PHR SHV6 N_Nep A 3 Means phase processed White Noise as generator, Neper as fall curve, 3 seconds of Impulse length.

WN PHR SHV6 N_Nep A MS 3 The same as previous but with an M/S building processing.

WN PHR SHV6 N_Nep A 6 Means phase processed White Noise as generator, Neper as fall curve, 6seconds of Impulse length.

WN PHR SHV6 N_Nep Oct A 6  Oct means one octave up.

The files on the other folders follow the same syntax meaning

The post 60.53 % LOG Neper WN appeared first on Tuned Pulses.

Neper

This is a curve with a very slow decay at Start and a very fast decay at the End. The area of the curve is 60.53 % of the full surrounding square area (-4.36 dB FSA).

If based on area ratio to Linear area, it’s RT60 time should be 1.21 of Linear RT60.

This curve was calculated inserting the Euler number 2.718282 into a base 10 logarithmic equation.

Logarithm – Wikipedia

3 WN

This collection was made by default Fall of Major or Minor chord octave frequencies from White Noise.

Basically, used on percussive material as extra slow decay impulse (gate reverb style), or in any electronic musical source.

The collection is divided into  44.1 kHz 24 bit, 48 kHz 24 bit and 96 kHz 24 bit folders.

In each folder 12 tone folders (A to Ab).

Inside each Tone folder, 2 folders Major and Minor, having 16 Impulse files each, in a total of 1152 Impulse files, with the following folder structure:

Wave Naming

3WN Neper A Min 3 Means 3 White Noise as generator, Neper as fall curve, A Minor as Tone and 3 seconds of Impulse length.

3WN Neper A Min MS 3 The same as previous but with M/S building processing.

3WN Neper A Min 6 Means 3 White Noise as generator, Neper as fall curve, A Minor as Tone and 6 seconds of Impulse length.

3WN Neper A Min D2Oct 3 D2Oct means 2 octaves down.

3WN Neper A Min DOct 3 DOct means one octave down.

3WN Neper A Min Oct 3 Oct means one octave up.

The files on the other folders follow the same syntax meaning

The post 60.53 % LOG Neper 3 WN appeared first on Tuned Pulses.

Neper

This is a curve with a very slow decay atStart and a very fast decay at the End. The area of the curve is 60.53 % of the full surrounding square area (-4.36 dB FSA).

If based on area ratio to Linear area, it’s RT60 time should be 1.21 of Linear RT60.

This curve was calculated inserting the Euler number 2.718282 into a base 10 logarithmic equation.

Logarithm – Wikipedia

3 UMD

3 UMD means that each frequency of the chord was faded out at a different speed, using the sequence Up-Mid-Down.

Basically, used on percussive material as extra slow decay impulse (gate reverb style), or in any electronic musical source.

The collection is divided into  44.1 kHz 24 bit, 48 kHz 24 bit and 96 kHz 24 bit folders.

Inside each folder 12 tone folders (A to Bb).

Inside each Tone folder, 2 folders Major and Minor, having 16 Impulse files each, in a total of 1152 Impulse files, with the following folder structure:

Wave Naming

3UMDWN Neper A Min 3 Means 3 UMD White Noise as generator, Neper as fall curve, A Minor as Tone and 3 seconds of Impulse length.

3UMDWN Neper A Min MS 3 The same as previous but with an M/S building processing.

3UMDWN Neper A Min 6 Means 3 UMD White Noise as generator, Neper as fall curve, A Minor as Tone and 6 seconds of Impulse length.

3UMDWN Neper A Min D2Oct 3 D2Oct means 2 octaves down.

3UMDWN Neper A Min D2Oct MS 3 the sane with M/S processing.

3UMDWN Neper A Min DOct 3 DOct means one octave down.

3UMDWN Neper A Min Oct 3 Oct means one octave up.

The files on the other folders follow the same syntax meaning

The post 60.53 % LOG Neper 3 UMD appeared first on Tuned Pulses.

Neper

This is a curve with a very slow decay at Start and a very fast decay at the End. The area of the curve is 60.53 % of the full surrounding square area (-4.36 dB FSA).

If based on area ratio to Linear area, it’s RT60 time should be 1.21 of Linear RT60.

This curve was calculated inserting the Euler number 2.718282 into a base 10 logarithmic equation.

Logarithm – Wikipedia

3 UMD WIDE

3 UMD means that each frequency of the chord was faded out at a different speed, using the sequence Up-Mid-Down.

WIDE  is a way of processing Right and Side channels in order to produce a wider space feeling.

Basically, used on percussive material as extra slow decay impulse (gate reverb style), or in any electronic musical source.

The collection is divided into  44.1 kHz 24 bit, 48 kHz 24 bit and 96 kHz 24 bit folders.

Inside each folder 12 tone folders (A to Ab).

Inside each Tone folder, 2 folders Major and Minor, having 16 Impulse files each, in a total of 1152 Impulse files, with the following folder structure:

Wave Naming

3UMDWIDE975 Neper A Min 3 Means 3 UMD WIDE White Noise as generator, Neper as fall curve, A Minor as Tone and 3 seconds of Impulse length.

3UMDWIDE975 Neper A Min MS 3 The sane as previous but with M/S processing.

3UMDWIDE975 Neper A Min 6 Means 3 UMD WIDE White Noise as generator, Neper as fall curve, A Minor as Tone and 6 seconds of Impulse length.

3UMDWIDE975 Neper A Min D2Oct 3 D2Oct means 2 octaves down.

3UMDWIDE975 Neper A Min DOct 3 DOct means one octave down.

3UMDWIDE975 Neper A Min Oct 3 Oct means one octave up.

The files on the other folders follow the same syntax meaning

The post 60.53 % LOG Neper 3 UMD WIDE appeared first on Tuned Pulses.

Neper

This is a curve with an extra-slow decay at Start and an extra-fast decay at the End. The area of the curve is 60.53% of the full surrounding square area (-4.36 dB FSA).

If based on area ratio (current to Linear (50%), it’s RT60 time should be 1,21 of Linear RT60.

This curve was calculated inserting the Euler number 2.718282  in a base 10 logarithmic equation.

Logarithm – Wikipedia

3 MUD

3 MUD means that each frequency of the chord was faded out at a different speed, using the sequence Mid-Up-Down.

Basically, used on percussive material as extra slow decay impulse (gate reverb style), or in any electronic musical source.

The collection is divided into  44.1 kHz 24 bit, 48 kHz 24 bit and 96 kHz 24 bit folders.

Inside each folder 12 tone folders (A to Ab).

Inside each Tone folder, 2 folders Major and Minor, having 16 Impulse files each, in a total of 1152 Impulse files, with the following folder structure:

Wave Naming

3MUDWN Neper A Min 3 Means 3 MUD White Noise as generator, Neper as fall curve, A Minor as Tone and 3 seconds of Impulse length.

3MUDWN Neper A Min MS 3 The same as previous but with M/S processing.

3MUDWN Neper A Min 6 Means 3 MUD White Noise as generator, Neper as fall curve, A Minor as Tone and 6 seconds of Impulse length.

3MUDWN Neper A Min D2Oct 3 D2Oct means 2 octaves down.

3MUDWN Neper A Min DOct 3 DOct means one octave down.

3MUDWN Neper A Min Oct 3 Oct means one octave up.

The files on the other folders follow the same syntax meaning

The post 60.53 % LOG Neper 3 MUD appeared first on Tuned Pulses.

Neper

This is a curve with a very slow decay at Start and a very fast decay at the End. The area of the curve is 60.53 % of the full surrounding square area (-4.36 dB FSA).

If based on area ratio to Linear area, it’s RT60 time should be 1.21 of Linear RT60.

This curve was calculated inserting the Euler number 2.718282 into a base 10 logarithmic equation:

Logarithm – Wikipedia

3 MUD WIDE

3 MUD means that each frequency of the chord was faded out at a different speed, using the sequence Mid-Up-Down.

WIDE  is a way of processing Right and Side channels to produce a wider space feeling.

Basically, used on percussive material as extra slow decay impulse (gate reverb style), or in any electronic musical source.

The collection is divided into  44.1 kHz 24 bit, 48 kHz 24 bit and 96 kHz 24 bit folders.

Inside each folder 12 tone folders (A to Bb).

Inside each Tone folder, 2 folders Major and Minor, having 16 Impulse files each, in a total of 1152 Impulse files, with the following folder structure:

Wave Naming

3MUDWIDE975 Neper A Min 3 Means 3 Mud Wide White Noise as generator, Neper as fall curve, A Minor as Tone and 3 seconds of Impulse length.

3MUDWIDE975 Neper A Min MS 3 The same as previous but with M/S processing.

3MUDWIDE975 Neper A Min 6 Means 3 MUD White Noise as generator, Neper as fall curve, A Minor as Tone and 6 seconds of Impulse length.

3MUDWIDE975 Neper A Min D2Oct 3 D2Oct means 2 octaves down.

3MUDWIDE975 Neper A Min DOct 3 DOct means one octave down.

3MUDWIDE975 Neper A Min Oct 3 Oct means one octave up.

The files on the other folders follow the same syntax meaning

The post 60.53 % LOG Neper 3 MUD WIDE appeared first on Tuned Pulses.